Table of Contents
Advertisement
3 Command Line Configuration
This chapter describes the operation methods and configuration commands of the
W800A command line configuration.
3.1 Overview
The W800A provides the Command Line Interface (CLI) for configuring the W800A
data.
The CLI configuration of the W800A has the following features:
1.
2.
3.
4.
5.
6.
You can not only i m plement local configuration through the hyper terminal
software with the serial port, but also implement local or remote configuration in
Telnet with the Ethernet interface and wireless network card.
The CLI provides five command modes: User, privileged, configure, Ethernet
interface configuration and wireless interface configuration modes. One mode is
the execution environment for a group of related commands, and one command
can be executed only in the corresponding command mode. To obtain the valid
commands in the current command mode, input "?" in the current mode.
Commands are of two types: information query and function. The information
query commands serve to obtain some information to be queried. The function
commands serve to change the function configuration of the W800A. The
changed configuration is saved in the running configuration information library.
To cancel the function configuration, execute the reverse command of the
former command (that is, no + key word + former command)
CLI provides perfect help system: At any time, you can input "?" to obtain the
related help information.
The command inputting provides the fuzzy match function: Once the
information input by the user is enough for determining a command, no more
information is required to be input.
CLI provides the command history function: You can select a historical
command for executing through "?" or "?" of the keyboard.
3-1
Advertisement
Table of Contents
