Privileged Mode; Network Connectivity Check; Saving The Configuration Data To Flash; Restoring The Default Configuration - Zte W800A Installation Instructions Manual

3.3 Privileged Mode

Entering mode: Input the enable command in the user mode and input correct
password.
Exiting mode: disable, entering the user mode; exit, exiting the privileged mode and
returning to the system.
Default prompt character: wlan #

3.3.1 Network Connectivity Check

Command mode: Privileged mode
Function: Checking the network connectivity.
Command format: ping <A.B.C.D> [-n <echo-number>] [-w <timeout>] [-l
<packet-size>] [-t]
Parameter descriptions:
Parameter Name
<A.B.C.D>
-n
<echo-number>
-w
<timeout>
-l
<packet-size>
-t

3.3.2 Saving the Configuration Data to FLASH

Command mode: Privileged mode.
Function: Saving the configuration data to FLASH.
Command format: write flash.

3.3.3 Restoring the Default Configuration

Command mode: Privileged mode
Function: Deleting the database, recovering the default configuration of the W800A
Value Range
IP address Destination IP address
None Setting the flag bit of ping packet quantity.
1~40 Quantity of ping packets.
Setting the flag bit of the maximum time-out
None
interval.
1~2 Maximum time-out interval (unit: second).
None Setting the flag bit of the buffer area capacity .
0~1504 Buffer area capacity
Setting the consecutive ping packets (complete it
None
by <Ctrl + C>)
3-5
Chapter 5 Command Line Configuration
Parameter Descriptions