Ip Network Parameter Configuration - Zte W800A Installation Instructions Manual

3.4.12 IP Network Parameter Configuration

1.
Parameter Name
<A.B.C.D
<A.B.C.D
second
2.
Parameter Name
<A.B.C.D
<A.B.C.D
<A.B.C.D
3.
Parameter Name
<index>
ip address
Command mode: Configure mode
Function: Adding the IP address of the W800A management interface.
Command format: [no] ip address <A.B.C.D
Parameter descriptions:
Value Range
1
> IP address
2
> Subnet mask
second
ip route
Command mode: Configure mode
Function: Configuring the default route address of the system.
Command format: [no] ip route <A.B.C.D
Parameter descriptions:
Value Range
1
> IP address
2
> Subnet mask
3
> IP address
ip pool
Command mode: Configure mode
Function: Configuring the IP address pool of the system.
Command format: [no] ip pool <index> <A.B.C.D
Parameter descriptions:
Value Range
0~9
Chapter 5 Command Line Configuration
has two wireless interfaces, so this value is 0 or 1.
1
> <A.B.C.D
Parameter Descriptions
IP address of the host.
Subnet mask of the host.
The main address is without "second" and the
standby address is with "second". The main address
quantity can only be one and the standby address
quantity can be up to nine.
1
> <A.B.C.D
Parameter Descriptions
IP address of the host.
Subnet mask of the host.
IP address of the router of the next hop.
Parameter Descriptions
IP address pool group ID
3-17
2
> [second]
2 3
> <A.B.C.D >
1 2
> <A.B.C.D > <A.B.C.D
3
>