Command To Configure Bridge Information; Commands To Configure Dhcp Server - Zte W200A User Manual

3.
mac
4.

5.4.2 Command to Configure Bridge Information

Mode of entry: Enter the bridge command in configure mode
bridge filterdb
Command mode: Configure mode
Function: Configure bridge filtration or cancel the configuration
Command format: wlan (config) #[no] bridge filterdb max-user aging-time
alarm-percent
Parameter description:
max-user
aging-time
alarm-percent

5.4.3 Commands to Configure DHCP Server

Mode of entry: Enter the dhcp server command in configure mode
Chapter Error! Style not defined. Error! Style not defined.
access-bridge server connect-client
Command mode: Configure mode
Function: Configure the MAC address of the access bridge connecting clients
Command format: wlan（config）#[no] access-bridge server connect-client mac
Parameter description:
Name Range
MAC address
xx-xx-xx-xx-xx-xx format
access-bridge server enable
Command mode: Configure mode
Function: Enable/disable the wireless bridge server
Command format: wlan (config) #[no] access-bridge server enable
Name Range
512~1024
10~100,000
1~10
in the MAC address of the access bridge connecting
clients
Maximum capacity of the MAC address
list
Aging time of the MAC address list
entries
Percent of alarms
5-7
Description
Description