Privileged Mode; Command To Test Network Connectivity; Command To Save Configurations To Flash; Command To Reset Software - Zte ZXR10 User Manual

ZXR10 WAS (V1.0) W140A Outdoor Wireless Access Point / Bridge User's Manual

5.3 Privileged Mode

Mode of entry: Type in the enable command in the in use mode and enter the correct
password.
Exit mode: disable for entering the user mode; exit for exiting the privileged mode and
go back to the system.
Default prompt: wlan#

5.3.1 Command to Test Network Connectivity

Command mode: privileged mode
Function: Test the network connectivity
Command format: ping A.B.C.D [-n echo-number] [-w timeout] [-l packet-size]
Parameter description:
A.B.C.D
-n
echo-number
-w
Timeout
-l
packet-size

5.3.2 Command to Save Configurations to Flash

Command mode: privileged mode
Function: Save configurations to flash
Command format: wlan#write flash

5.3.3 Command to Reset Software

Command mode: privileged mode
Function: Reset W140A
Command format: wlan#reboot
Name Range
IP address
Null
1~40
Null
1~2
Null
0~1504
Description
Destination IP address
Sets the flag bits for the number of PING packets
The number of PING packets
Sets the flag bits for the maximum timeout interval
Maximum timeout interval (unit: s)
Sets the flag bits for the capacity of buffer area
Capacity of buffer area
5-4