Selecting The Sub-Room Source To Play; Adjusting The Sub-Room Volume - JVC RX-9010VBK Service Manual

Selecting the Sub-room Source to Play

Press one of the source selecting buttons.
The lamp on the front panel button for selected source lights up.
• The selected source name also appears on the display.
• When the source name of TV SOUND/DBS is assigned to "TV
SOUND," TV SOUND/DBS buttons does not work. To change the
source name, see "Changing the Source Name" on page 33.
On the front panel:
DVD MULTI DVD VCR 1
PHONO CD CDR
From the remote control:
DVD DVD MULTI
VCR 1 VCR 2
TV/DBS VIDEO
Selected source name for the sub-room appears
DGTL AUTO DVD MULTI
L C R
ANALOG
SUBWFR LFE
LINEAR PCM
LS S RS
DIGITAL
SPEAKERS
1 1 2 SUB ROOM
Current volume level for the sub-room is shown here
DVD Select the DVD player.
CD*
Select the CD player.
TAPE/MD* Select the cassette deck (or the MD recorder).
TV (SOUND)/DBS Select DBS tuner.
• Does not work for selecting TV.
VIDEO Select video component connected to the
VIDEO jacks.
PHONO* Select the turntable.
FM/AM*
Select an FM or AM broadcast.
• Each time you press the button, the band
alternates between FM and AM.
VCR 1
Select the video component connected to the
VCR 1 jacks.
VCR 2
Select the video component connected to the
VCR 2 jacks.
CDR*
Select the CD recorder.
USB AUDIO*
Select the personal computer (PC) connected
to the USB terminal.
25
VCR 2 VIDEO TV SOUND/DBS
SOURCE NAME
TAPE / MD USB AUDIO FM / AM
SOURCE NAME
PHONO CD
TAPE/MD CDR
FM/AM USB AUDIO
PRO LOGIC AUTO MUTING TUNED STEREO RDS EON
DSP 3D–PHONIC MIDNIGHT MODE TA NEWS INFO
HEADPHONE DIGITAL EQ INPUT ATT ONE TOUCH OPERATION
MAIN ROOM
SUB ROOM
SLEEP VOLUME
Notes:
• When connecting an MD recorder (to the TAPE/MD jacks), and a
DBS tuner (to the TV SOUND/DBS jacks), change the source
names shown on the display. For details, see page 33.
• When you press one of the source selecting buttons on the remote
control marked with an asterisk ( * ), the receiver automatically turns
on. If you turn on the receiver with MAIN ROOM/SUB ROOM
selector set to "SUB ROOM", press MAIN ROOM ON/OFF to
activate the main room operations.
• The source lamp does not light up for the sub-room source.
• You cannot select the following as the sub-room source:
– "TV SOUND"
– "DVD MULTI"
– Any digital input
You can only select the analog input as the sub-room source.
• You can select the video components as the sub-room source;
however, you can see no pictures.

Adjusting the Sub-room Volume

On the front panel:
To increase the volume, turn MASTER
VOLUME clockwise.
To decrease the volume, turn it
counterclockwise.
• When you turn MASTER VOLUME rapidly,
the volume level also changes rapidly.
• When you turn MASTER VOLUME slowly,
the volume level also changes slowly.
From the remote control:
To increase the volume, press VOLUME +.
To decrease the volume, press VOLUME –.
CAUTIONS:
• Always set the volume to the minimum before starting any source. If
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
• Be careful not to turn up the volume so high when controlling the
receiver without listening to the playback sound. For example, when
adjusting the volume level in the sub-room from the main room.
Note:
The volume level can be adjusted within the range of "0" (minimum) to
"90" (maximum).
MASTER VOLUME
VOLUME