Available Dsp Modes According To The Speaker Arrangement - JVC RX-9010VBK Service Manual

Available DSP Modes According to the Speaker Arrangement

Available DSP modes will vary depending on how many speakers are used with this receiver.
Make sure that you have set the speaker information correctly (see page 29).
Speaker arrangements
TV
Front
speaker
Center
speaker
Rear
speaker
TV
Front
speaker
Rear
speaker
TV
Front
speaker
Center
speaker
TV
Front
speaker
TV
When the SUB ROOM and SPEAKERS SUB ROOM indicators are lit on the front panel
You can only use 3D-PHONIC modes for the main room source, without respect to the center/rear speaker connection.
39
Each time you press DSP MODE, the DSP modes change as follows:
\ THEATER 2
THEATER 1
Front
\ DANCE CLUB
LIVE CLUB
speaker
5 CH STEREO (when using 5 speakers) or 4 CH STEREO (when using 4 speakers)* \
3D ACTION or 3D DIGITAL
(Back to the beginning)
Rear
To activate the Surround mode, press SURROUND ON/OFF button so that the
speaker
SURROUND ON/OFF lamp on the front panel button lights up.
Front
speaker
Notes:
• If the settings for the center and the rear speakers are changed to "NONE" (see page 29),
the Surround mode will be canceled.
• When both of the Surround mode and DSP mode are deactivated, "SURR. OFF" appears
on the display.
Rear
speaker
* "5CH STEREO" is selected when setting the center speaker to "LARGE" or "SMALL," and
"4CH STEREO" is selected when setting the center speaker to "NONE" (see page 29).
\ THEATER 2
THEATER 1
\ DANCE CLUB
LIVE CLUB
Front
3D ACTION or 3D DIGITAL
speaker
(Back to the beginning)
To activate the Surround mode, press SURROUND ON/OFF button so that the
SURROUND ON/OFF lamp on the front panel button lights up.
Notes:
• If the setting for the center speaker is changed to "NONE" (see page 29), the Surround
mode will be canceled.
• When both of the Surround mode and DSP mode are deactivated, "SURR. OFF" appears
on the display.
\ THEATER 2
THEATER 1
Front
\ DANCE CLUB
LIVE CLUB
speaker
3D ACTION or 3D DIGITAL
(Back to the beginning)
Note:
Surround mode cannot be used when only the front speakers are connected.
HEADPHONE j
Note:
To use the HEADPHONE or HEADPHONE DSP mode, deactivate both of the front speakers
(see page 19).
Available DSP modes
\ HALL 1
\ PAVILION
\ SURR. OFF (DSP OFF)
\ HALL 1
\ PAVILION
\ SURR. OFF (DSP OFF)
\ HALL 1
\ PAVILION
\ SURR. OFF (DSP OFF)
HEADPHONE DSP
\ HALL 2 \
\
\
\ HALL 2 \
\
\
\ HALL 2 \
\
\