JVC RX-9010VBK Service Manual page 142

One-Touch DVD Play
Simply by starting playback on the DVD player, you can enjoy the
DVD playback without setting other switches manually.
When you press PLAY on the remote control supplied with this
receiver for operating the DVD player, the receiver automatically
turns on and changes the main room source or sub-room source
(depending on MAIN ROOM/SUB ROOM selector setting on the
remote control) to the appropriate input — "DVD," or "DVD
MULTI" as the main room source, and "DVD" as the sub-room
source.
The TV automatically turns on (for main room operations only) and
changes the input mode to the position so that you can view the
playback picture.
• When the DVD player is connected through the analog input jacks
on this receiver (and analog input is selected), the receiver
automatically turns on and changes the source to "DVD" or "DVD
MULTI."
– If the receiver is already turned on, and the SUB ROOM
indicator and the source name for sub-room are lit on the
display, the receiver changes the sub-room source to "DVD." In
this case, the TV will not turn on automatically.
• When the DVD player is connected through the digital input
terminal on this receiver (and digital input is selected), the
receiver automatically turns on and changes the main room source
to "DVD."
– If the receiver is already turned on and the SUB ROOM
indicator and the source name for sub-room are lit on the
display, no sound comes out.
Automatic Selection of TV's Input Mode (Only for the
Main Room Operations)
• When you select "TV" as the main room source to play on the
receiver, the TV automatically changes the input mode to the TV
tuner so that you can watch TV.
• When you select "DVD," "DVD MULTI," "VCR 1," "VCR 2, "
"VIDEO" or "DBS" as the main room source to play on the
receiver, the TV automatically changes the input mode to the
appropriate position (either Video Input 1 or Video Input 2) so that
you can view the playback picture.
Notes:
• When you select "TV " as the source on the receiver, you cannot
see the menu on the TV screen since the AV COMPU LINK remote
control system automatically changes the TV's input mode to the
TV tuner.
If you do not mind stopping listening to the TV sounds, you can
then show the on-screen displays after changing the TV's input
mode to the appropriate position (either Video Input 1 or Video
Input 2) the receiver is connected to.
• This function does not work when you connect the TV with the AV
COMPU LINK to the AV COMPU LINK EX. In this case, reconnect
the TV referring to case 1 or case 2 on page 63.
Automatic Power On/Off (Standby)
Automatic Power On:
The TV, VCR 1 (the VCR connected to the VCR 1 jacks), and DVD
player turn on and off along with the receiver.
• When you turn on the receiver by pressing POWER on the
front panel or AUDIO POWER ON on the remote control
(with MAIN ROOM/SUB ROOM selector set to "MAIN
ROOM"):
When you turn on the main room sound by pressing
MAIN ROOM ON/OFF while the receiver is turned on:
The MAIN ROOM indicator and the source name for the main
room light up on the display, and —
– If the previously selected main room source is "VCR 1," the
TV and VCR 1 will turn on automatically.
– If the previously selected main room source is "DVD," or
"DVD MULTI," the TV and DVD player will turn on
automatically.
– If the previously selected main room source is "VIDEO,"
"VCR 2", "TV" or "DBS," only the TV will turn on
automatically.
• When you turn on the receiver by pressing
AUDIO POWER ON on the remote control (with MAIN
ROOM/SUB ROOM selector set to "SUB ROOM"):
When you turn on the sub-room sound by pressing
SUB ROOM ON/OFF while the receiver is turned on:
The SUB ROOM indicator and the source name for the sub-room
light up on the display, and —
– If the previously selected sub-room source is "VCR 1," the
VCR 1 will turn on automatically.
– If the previously selected sub-room source is "DVD," the DVD
player will turn on automatically.
– If the previously selected sub-room source is "VIDEO," "VCR
2," or "DBS," nothing happens.
Automatic Power Off (Standby):
• When you turn off the receiver by pressing POWER, the TV,
VCR 1 and the DVD player will turn off (standby).
• When you turn off the main room sound by pressing
MAIN ROOM ON/OFF, the selected main room source
component turns off (unless the same component is selected as the
sub-room source), and the TV also turns off.
– If the SUB ROOM indicator and the source name for the sub-
room are lit on the display, nothing happens.
• When you turn off the sub-room sound by pressing
SUB ROOM ON/OFF, the selected sub-room source component
turns off (unless the same component is selected as the main room
source).
– If the MAIN ROOM indicator and the source name for the main
room are lit on the display, nothing happens.
Note:
If you turn off the receiver by pressing POWER or turn off the main
room sound by pressing MAIN ROOM ON/OFF while recording on the
VCR 1, the VCR 1 will not turn off, but continue recording.
OR
OR
64