Selecting The Sub-Room Source To Play; Adjusting The Sub-Room Volume - JVC RX-DP10VBK Instructions Manual

Selecting the Sub-Room Source to Play

Press one of the source selecting buttons.
DVD DVD MULTI VCR 1 VCR 2 TV/DBS VIDEO
On the unit
Selected source name
DVD DVD MULTI
VCR 1 VCR 2
TV/DBS VIDEO
On the remote control
DVD : Selects the DVD player.
VCR 1 : Selects the video component connected to the VCR
1 jacks.
VCR 2 : Selects the video component connected to the VCR
2 jacks.
TV/DBS : Selects the DBS tuner.
• Does not work for selecting TV.
VIDEO : Selects the video component connected to the
VIDEO jacks.
CD* : Selects the CD player.
PHONO* : Selects the turntable.
TAPE/MD* : Selects the cassette deck (or the MD recorder).
CDR* : Selects the CD recorder.
FM* : Select an FM broadcast.
AM* : Selects an AM broadcast.
Notes:
• When you press one of the source selecting buttons on the remote
control marked with an asterisk ( * ), the receiver automatically turns
on. If you turn on the receiver with MAIN ROOM/SUB ROOM
(LEARN/TRANSMIT) selector set to "MAIN ROOM", press SUB
ROOM ON/OFF to activate the sub-room operations.
– Pressing one of the audio source selecting buttons on the remote
control (except FM and AM) with the MAIN ROOM/SUB ROOM
(LEARN/TRANSMIT) selector set to "SUB ROOM" while the
receiver is turned on but the sub-room is turned off, the sub-room
is turned on with the audio source selected.
• You cannot select the following as the sub-room source:
– "TV"
– "DVD MULTI"
– Any digital input
You can only select the analog input as the sub-room source. (If
analog connections have not been done, no sound comes out of
the sub-room speakers.)
29
CD PHONO TAPE/MD CDR FM AM
SPEAKERS 1 SUB ROOM
VOLUME
dB
The sub-room volume
level appears.
PHONO CD
CDR
TAPE/MD
FM AM

Adjusting the Sub-Room Volume

On the unit:
To increase the volume, turn MASTER
VOLUME clockwise.
To decrease the volume, turn it
counterclockwise.
• When you turn MASTER VOLUME rapidly,
the volume level also changes rapidly.
• When you turn MASTER VOLUME slowly,
the volume level also changes slowly.
From the remote control:
To increase the volume, press VOLUME +.
To decrease the volume, press VOLUME –.
CAUTIONS:
• Always set the volume to the minimum before starting any source. If
the volume is set at a high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
• Be careful not to turn up the volume so high when controlling the
receiver without listening to the playback sound. For example, when
adjusting the volume level in the sub-room from the main room.
Notes:
• The volume level can be adjusted within the range of "– – – dB"
(minimum) to "+18.0 dB" (maximum).
• With "SUBROOM PREOUT" set to "FIXED" (see page 40), no
sounds come out of the SUB ROOM PREOUT jacks if the volume
level is set to "– – – dB." If this case, increasing the volume level will
enable the sound output through the SUB ROOM PREOUT jacks.
MASTER VOLUME
Down
Up
VOLUME