Basic Operations
Turning the Power On and Off
STANDBY
STANDBY/ON
STANDBY
STANDBY/ON
Front panel
AUDIO
Remote Control
Selecting the Source to Play
SOURCE
Front panel
The following operations are commonly used when you play any sound source.
On the front panel:
To turn on the power, press STANDBY/ON
The STANDBY lamp goes off. The name of the current source (or station frequency) appears on the
display.
Current source
name appears
100
1k
To turn off the power (into standby mode), press STANDBY/ON
The STANDBY lamp lights up.
From the remote control:
To turn on the power, press AUDIO
The STANDBY lamp goes off. The name of the current source appears on the display.
To turn off the power (into standby mode), press AUDIO
The STANDBY lamp lights up.
Note:
Pressing STANDBY/ON
or AUDIO
STANDBY lamp. A small amount of power is consumed in standby mode. To turn the power off completely,
POWER to set it in the — OFF position on the front panel.
press
You need to select the source before you start playing any source.
On the front panel:
1. Press SOURCE so that the Control % % % % % / fi fi fi fi fi buttons work for selecting the source.
2. Press Control % % % % % / fi fi fi fi fi until the source name you want appears on the display.
The selected source lamp also lights up.
Selected source
name appears
.
10k
.
again turns off the power (into standby mode) and lights the
MUTE AUTO TUNED STEREO
FM
AM
CH–
SURROUND PRO LOGIC
SEA
100
1k
10k
Volume level is also
shown here
whenever the power
VOLUME
is on.
again.
again.
EON
TA NEWS INFO
SLEEP
MHz
kHz
3CH
LOGIC
HALL
LOUDNESS
VOLUME
Page 12