Create And Process Graphic Elements; Figure 102 Graphic Editor (Create A Bitmap) - Leibinger JET3 up Operating Manual

Page 216
7.5.6.8

Create and process graphic elements

1. Creation of graphic elements:
Example: A rectangle shall be created
Proceeding:
 Select the <Rectangle> tool (2) from the the <Function> drop-down menu
(1).
 Click on the drawing area at the position of the first corner of the rectangle
(3).
 This point is marked red. The position is displayed by the <Coordinates>
indicator (4). In the <status bar for the current tool > (5) the next step is
displayed.
 With a click on the position of the second corner of the rectangle (6) the
rectangle will be created.
Figure 102 Graphic editor (Create a bitmap)
1 – Drop-down menu <Function> 4 – <Coordinates> indicator
2 – <Rectangle> tool
3 – First corner of the rectangle
Release R1.06
Job Editor
1
2
3
5
6
5 – <Status bar for the current tool>
6 – Second corner of the rectangle
Group 8
4
JET3up