Delete Jobs; Reload All Fonts; Figure 107 Explorer (Delete Job) - Leibinger JET3 up Operating Manual

Group 8

7.5.7.4 Delete jobs

A job can only be deleted in the explorer!
(Example: The job „counter" should be deleted in the internal memory.)
Figure 107 Explorer (Delete job)
1 – <Delete> Tool
2 – Selection list <intern. memory>
3 – Selected job
4 – Confirmation prompt <Delete file>
Proceeding:
 Activate the selection list of the <internal memory> (2) by clicking on it. The
border of the window is now displayed turquoise.
 Select the job with the file name "counter.job" (3) by clicking on the check box
or the file name. The selection is displayed with a √ in the check box.
 Press the icon of the <Delete> tool (1).
 The confirmation prompt <Delete file?> (4) pops up.
 Press the button <Yes> (6) to delete the selected job or press the button
<No> (7) or the button <Cancel> (8) to abort the process.

7.5.8 Reload all fonts

With these functions alle fonts in the font folder of the JET3up will be reloaded.
This function is required to make fonts created or edited with the font editor
available for print jobs.
Also if there is a font copied to the font folder of the JET3up from an extrnal
source all fonts have to be reloaded in order to make the recently added font
available. Please see Make fonts available for the job editor on page 205 for details.
JET3up
Job Editor
INFORMATION
1
4
5
2
3
5 – <Yes, All> Button
6 – <Yes> Button
7 – <No> Button
8 – <Cancel> Button
Page 223
8
6 7
Release R1.06