Table of Contents
Advertisement
System Cooling
The SC732D3-1200B includes a super quiet system fan that provides cooling for the chassis.
No tools or screws are required to install the system fan.
If the chassis fan fails, the system must be powered down before replacing it. If the power
supply fan fails, the power supply itself must be replaced.
Installing the Rear Exhaust Fan
Begin by removing power from the system as described in section 3.1 and remove the chassis
cover as described in section 3.2.
1. Remove the left chassis cover as described in section 3-2.
2. Insert the four rubber pins into the four mounting holes surrounding the fan grill on the
rear of the chassis.
3. Pull the rubber pins through the mounting holes of the fan to secure the fan to the
chassis.
4. Connect the fan cable to the serverboard.
Chapter 3: Maintenance and Component Installation
2
Figure 3-12. Replacing the System Fan
35
Advertisement
Table of Contents
