Quick Reference Table - Supermicro SuperWorkstation 7039A-I User Manual

Quick Reference Table

Jumper Description
JBT1 CMOS Clear
JPG1 VGA Enable/Disable
JPME1 ME Recovery
JPME2 Manufacturing Mode Select
JVRM1 VRM SMB Clock to BMC
JVRM2 VRM SMB Data to BMC
JWD1 Watch Dog Timer
Connector Description
Audio (JA1) Audio connector for front access
Audio (JAUDIO1) Audio port on the I/O back panel
BT1 Onboard CMOS battery
COM2 (JCOM2) COM/serial port header for front access
FAN1-6, FANA System cooling fan headers (FAN1-FAN6, FAN A)
JD1 Internal speaker/buzzer
JTBT1 Thunderbolt header
JF1 Control panel header
JIPMB1 4-pin BMC external I
JL1 Chassis intrusion header
JNCSI NCSI header
JNVI C1/2 NVMe I
2
JNVME1/2 NVMe slots 1/2
JP2 Complex-Programmable Logical Device (CPLD) header
JP4 5V/5V AUX switch
JSD1/JSD2 SATA DOM (Disk-on-Module) power connectors 1/2
JPI C1 Power supply SMBbus I
2
JPWR1/JPWR2 8-pin power supply connectors
JPWR3 24-pin ATX main power supply connector
JRK1 RAID key for onboard SATA devices
JSPDIF_In/JSPDIF_Out SPDIF (Sony/Philips Digital Interconnect Format) Audio In/Out connectors
JTPM1 Trusted Platform Module/Port 80 connector
LAN1/LAN2 Gigabit LAN (1G LAN) Ethernet ports on the IO back panel
M.2-CPU1 M.2 Slot supported by CPU1
SATA1~4, 5~8 SATA 3.0 connection headers supported by the Intel PCH
S-SATA1/2 (SuperDOM) S-SATA connection headers w/power-pins built-in and supported by the Intel SCU
(CPU1) Slot1/Slot2 PCI-Express 3.0 x16 slots supported by CPU1
(CPU2) Slot3/Slot5 PCI-Express 3.0 x16 slots supported by CPU2
(CPU2) Slot4/Slot6 PCI-Express 3.0 x8 slots supported by CPU2
C header (for an IPMI card)
2
C headers 1/2
2
C header
2
13
Chapter 1: Introduction
Default Setting
Open (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Normal)
Pins 1-2 (Normal)
Pins 1-2 (Normal)
Pins 1-2 (Reset)