Super Io Configuration - Supermicro SuperWorkstation 7039A-I User Manual

SuperWorkstation 7039A-I User's Manual
Ipv6 PXE Support
Use this feature to enable Ipv6 PXE Boot Support. If this feature is disabled, it will not create
the Ipv6 PXE Boot option. The options are Disabled and Enabled.
Ipv6 HTTP Support
Use this feature to enable Ipv6 HTTP Boot Support. If this feature is disabled, it will not create
the Ipv6 HTTP Boot option. The options are Disabled and Enabled.
PXE Boot Wait Time
Use this feature to select the wait time to press the ESC key to abort the PXE boot. The
default is 0.
Media Detect Count
Use this feature to select the wait time in seconds to detect LAN media. The default is 1.
Super IO Configuration
The following Super IO information will display:
•
Super IO Chip 2500
Serial Port 2
Select Enabled to enable the onboard serial port specified by the user. The options are
Enabled and Disabled.
Device Settings
This item displays the base I/O port address and the Interrupt Request address of a serial
port specified by the user.
Note: This item is hidden when Serial Port 1 is set to Disabled.
Change Port 2 Settings
This feature specifies the base I/O port address and the Interrupt Request address of Serial
Port 1or Serial Port 2. Select Auto for the BIOS to automatically assign the base I/O and
IRQ address to a serial port specified.
The options for Serial Port 2 are Auto, (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4, 5, 6, 7, 9,
10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12); (IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10,
11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
74