Supermicro SuperWorkstation 7039A-I User Manual page 72

SuperWorkstation 7039A-I User's Manual
Maximum Read Request
Select Auto for the system BIOS to automatically set the maximum size for a read request
for a PCI-E device to enhance system performance. The options are Auto, 128 Bytes, 256
Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.
MMCFG Base
Use this item to select the low base address for PCIE adapters to increase base memory.
The options are 1G, 1.5G, 1.75G, 2G, 2.25G. and 3G.
VGA Priority
Use this item to select the graphics device to be used as the primary video display for system
boot. The options are Onboard and Offboard and Auto.
PCI Devices Option Rom Setting
Onboard NVMe1 Option ROM
This feature Enables or Disables NVME1 OPROM option. The options are EFI, Legacy,
and Disabled.
Onboard NVMe2 Option ROM
This feature Enables or Disables NVME2 OPROM option. The options are EFI, Legacy,
and Disabled.
CPU SLOT1 PCI-E 3.0 X16 OPROM
Select Enabled to enable Option ROM support to boot the computer using a de-
vice installed on the slot specified by the user. The options are Disabled, Legacy
and EFI. Use this feature to select which firmware type to be loaded for the add-on card in
this slot. The options are Disabled, Legacy, and EFI.
CPU SLOT2 PCI-E 3.0 X16 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
CPU SLOT3 PCI-E 3.0 X16 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
72