Appendix C System Specifications - Supermicro SuperWorkstation 7039A-I User Manual

Table of Contents

Advertisement

Appendix C: System Specifications
Appendix C
System Specifications
Processors
Dual Intel Xeon 81xx/61xx/51xx/41xx/31xx Series processors in an SKX type socket
Note: Please refer to the motherboard specifications pages on our website for updates to supported processors.
Chipset
Intel C621 chipset
BIOS
128 Mb AMI® Flash ROM
Memory
Sixteen 240-pin DIMM slots that can support up to 2048 GB of Load Reduced DIMMs (LRDIMM), 3D LRDIMMs, Non-Volatile
DIMMs (NV-DIMM) ECC DDR4-3200/2933/2666/2400/2133 memory.
Note: See the memory section in Chapter 3 for details and our website for updates to supported memory.
SATA Controller
On-chip (C621) controller
Drive Bays
Eight 3.5" hot-swap drive bays to house eight SATA drives
PCI Expansion Slots
Four PCI-Express 3.0 x16 slots (Slot1/Slot2 supported by CPU1, Slot3/Slot5 supported by CPU2)
Two PCI-Express 3.0 x8 slots (Slot4/Slot6 supported by CPU2)
Motherboard
X11DAi-N; ATX form factor (12 x 13 in. / 304.8 x 330.2 mm.)
Chassis
SC732D3-1200B: mid-tower, 7.6 x 16.7 x 20.68 in. / 193 x 424 x 525.3 mm. (W x H x D)
System Cooling
One 12-cm low-noise exhaust fan and (optional) one 12-cm low-noise front cooling fan
Power Supply
Model: PWS-1K25P-PQ
AC Input Voltages: 100-240 VAC
Rated Input Current: 8A (115V) to 12A (240V)
Rated Input Frequency: 50-60 Hz
Rated Output Power: 1200W
Rated Output Voltages: +3.3V (20A), +5V (20A), +12V (99A), -12V (0.3A), +5Vsb (3A)
Efficiency Rating: 94% (peak)
Operating Environment
Operating Temperature: 10º to 35º C (50º to 95º F)
Non-operating Temperature: -40º to 60º C (-40º to 140º F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
115

Advertisement

Table of Contents
loading

Table of Contents