Ports - Supermicro SuperWorkstation 7039A-I User Manual

SuperWorkstation 7039A-I User's Manual
HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach a cable to pin 14 to
show hard drive activity status. Refer to the table below for pin definitions.
Power LED
The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table below
for pin definitions.
NMI Button
The non-maskable interrupt (NMI) button header is located on pins 19 and 20 of JF1. Refer
to the table below for pin definitions.

4.3 Ports

I-SATA 3.0 and S-SATA 3.0 Ports
The X11DAi-N has eight SATA 3.0 ports (SATA1-4, 5-8) supported by the Intel PCHC620 and
two S-SATA (S-SATA1/2) supported by the Intel SCU. S-SATA1/2 can be used with Supermicro
SuperDOMs, which are yellow SATA DOM connectors with power pins built in, and do not
require external power cables. Supermicro SuperDOMs are backward-compatible with regular
SATA HDDs or SATA DOMs that need external power cables.
HDD LED
Pin Definitions (JF1)
Pins Definition
13 3.3V Stdby
14 HDD Active
Power LED
Pin Definitions (JF1)
Pins Definition
15 3.3V
16 PWR LED
NMI Button
Pin Definitions (JF1)
Pins Definition
19 Control
20 Ground
44