Table of Contents
Advertisement
1.4 Server Chassis Features
Control Panel
The switches and LEDs located on the control panel are described below. See Chapter 4 for
more details on the control panel.
Item
Feature
1
USB 3.0 Ports
2
NIC LED
3
HDD LED
4
Information LED
5
Power Button
6
Line Out
7
Mic
Status
Continuously on and red
Blinking red (1Hz)
Solid blue
Blinking blue
1
Figure 1-1. Control Panel View
Control Panel Features
Description
Front access USB 3.0 ports (2x)
Indicates network activity on the LAN port when flashing.
Indicates activity on the hard drive when flashing.
See table below
The main power button is used to apply or remove power from the power supply
to the server. Turning off system power with this button removes the main power
but maintains standby power. To perform many maintenance tasks, you must
also unplug system before servicing
Line out jack
Microphone jack
Information LED
Description
An overheat condition has occured.
(This may be caused by cable congestion.)
Fan failure, check for an inoperative fan.
Local UID has been activated. Use this function to
locate the server in a rackmount environment.
Remote UID is on. Use this function to identify the
server from a remote location.
9
Chapter 1: Introduction
2
5
3
4
6
7
Advertisement
Table of Contents
