Table of Contents
Advertisement
System Cooling
Rear Fan
The system includes a super quiet system exhaust fan that provides cooling. No tools or
screws are required for installation. If the power supply fan fails, the power supply itself must
be replaced.
Installing the Rear Fan
1. Remove power from the system as described in section 3.1, and remove the left chassis
cover.
2. Insert the four rubber pins into the four mounting holes surrounding the fan grill on the
rear of the chassis.
3. Pull the rubber pins through the mounting holes of the fan to secure the fan to the
chassis.
4. Connect the fan cable to the serverboard.
Chapter 3: Maintenance and Component Installation
2
Figure 3-13. Replacing the System Fan
35
Advertisement
Table of Contents
