POWR
Engine unit
1
Engine unit installation
1. Install:
• Engine unit
Installation steps:
1. Suspend the engine unit using all 3 engine
hangers.
2. Lower the front of the engine unit.
3. Lower the engine unit into the engine com-
partment vertically.
CAUTION:
When installing the engine unit, take care
to avoid causing damage to the hull and
deck opening.
4. Lift the front of the engine unit slightly, and
lower the unit. Repeat this step until the
drive and driven couplings are aligned.
5. Move the engine unit rearward to connect
the coupling 1, and lower the unit onto the
engine mounts.
NOTE:
Do not install the rubber damper until the cou-
pling clearance adjustment has been made.
5-18
E
1
2
3
4
5
6
7
8
9