Oil Filter Replacement - Yamaha WaveRunner FX SHO Service Manual

CHK
ADJ
Power unit
PORT
1
STBD
5
1
E
2
3
4
2
3-15
3. Remove the oil filler cap 1 and oil level
gauge 2.
4. Insert the tube 3 of an oil changer into the
oil level pipe 4.
5. Operate the oil changer to extract the oil.
6. Fill the crankcase with the specified
amount of the recommended engine oil
through the oil filler hole 5.
Recommended engine oil:
API: SE, SF, SG, SH, SJ, or SL
SAE: 10W-30, 10W-40, 20W-40, or
20W-50
Engine oil quantity:
Total amount:
4.3 L (4.55 US qt, 3.78 Imp.qt)
Without oil filter replacement:
3.0 L (3.17 US qt, 2.64 Imp.qt)
With oil filter replacement:
3.1 L (3.28 US qt, 2.73 Imp.qt)
7. Install the oil filler cap 1 and oil level
gauge 2.
8. Check the engine oil level.
Refer to "Engine oil level check."
NOTE:
When adding engine oil, wait approximately 5
minutes until the engine oil settles.

Oil filter replacement

1. Replace:
• Oil filter
Replacing steps:
1. Remove the engine cover.
2. Place a rag under the oil filter 1.
3. Remove the oil filter with the special ser-
vice tool.
Oil filter wrench:
90890-06830
4. Lubricate the O-ring 2 of the new oil filter
with a thin coat of engine oil.
CAUTION:
Make sure the O-ring 2 is positioned cor-
rectly in the groove of the oil filter.
E