Starting System; Fuse - Yamaha WaveRunner FX SHO Service Manual

– +
ELEC
Y B
Fuel system / Starting system
É
È
3. Measure:
• Fuel sender resistance
Out of specification → Replace the fuel
sender.
Refer to "Fuel sender removal" in Chap-
ter 4.
Measurement steps:
1. Remove the fuel pump module.
Refer to "Fuel tank removal" in Chapter 4.
2. Measure the fuel sender resistance.
Fuel sender resistance at 20 °C
(68 °F) (reference data):
Float position
Lower position È
Upper position É

Starting system

Fuse

1. Check:
• Fuse continuity
No continuity → Replace the fuse.
7-47
E
Yellow (Y) –
Black (B)
133.5–136.5 Ω
5.0–7.0 Ω