Yamaha WaveRunner FX SHO Service Manual page 108

CHK
ADJ
General
3. Lubricate:
• QSTS cables (handlebar end)
NOTE:
• Before lubricating the QSTS cables, remove
the QSTS grip assembly from the handlebar.
Refer to "Handlebar assembly removal" in
Chapter 8.
• Spray the rust inhibitor into the outer cables,
and apply grease to the inner cables.
Recommended lubricant:
Yamaha grease A
Rust inhibitor
4. Lubricate:
• QSTS cables (pulley end)
• QSTS rod joint (pulley end)
Recommended lubricant:
Yamaha grease A
5. Lubricate:
• Nozzle pivot shaft
• Steering cable (nozzle end)
• Steering cable end (nozzle end)
• QSTS rod joint (nozzle end)
Recommended lubricant:
Yamaha grease A
3-25
E