Starter Motor Operation; Armature - Yamaha WaveRunner FX SHO Service Manual

– +
ELEC
Starter motor
1
3
1

Starter motor operation

2
1. Check:
Checking steps:
4
1. Hold the starter motor in a vise using alu-
2. Connect the positive battery cable 1 to
3. Connect the negative battery cable 3 to
4. Check the starter motor operation.
NOTE:
• Check the starter motor operation for a few
seconds.
• If the starter motor is disassembled, be sure
to check the operation again after assem-
bling it.

Armature

1. Check:
2
NOTE:
Remove all metal particles with compressed
air.
7-56
• Starter motor operation
Does not operate → Check the starter
motor.
minum plates on both sides.
the starter motor terminal bolt 2.
the starter motor body 4.
• Armature shaft 1
Wear/damage → Replace the armature.
• Commutator 2
Dirt → Clean with 600-grit sandpaper.
E
1
2
3
4
5
6
7
8
9