Yamaha WaveRunner FX SHO Service Manual page 213

POWR
Generator cover and flywheel magneto
2
b
4
3
5
4
7
2
a
1
E
3
6
5-88
2. Install:
• Starter gear 1
• Woodruff key 2
• Flywheel magneto 3
• Transfer shaft 4
Installation steps:
1. Install the starter gear 1, woodruff key 2,
flywheel magneto 3, and transfer shaft 4.
NOTE:
Be sure to remove any grease from the
tapered portion a of the crankshaft and the
inner surface b of the flywheel magneto 3.
2. Hold the flywheel magneto 3 with the spe-
cial service tools 5 and 6, and then
tighten the transfer shaft 4 with the spe-
cial service tool 7.
NOTE:
Apply engine oil the threads of the crankshaft
before installing the transfer shaft.
Shaft holder 5:
90890-06721
Driver handle 6:
90890-06722
Crankshaft holder 7:
YB-06562/90890-06562
Transfer shaft:
120 N·m (12.0 kgf·m, 88.5 ft·lb)
E
1
2
3
4
5
6
7
8
9