Electric Bilge Pump Strainer Check; General; Drain Plug Check; Throttle Valve And Engine Internal Components - Yamaha WaveRunner FX SHO Service Manual

CHK
ADJ
Bilge pump / General
1
2
4
3
2
1
1

Electric bilge pump strainer check

1. Remove:
• Negative battery cable 1
• Band 2
• Electric bilge pump cap 3
• Electric bilge pump strainer 4
2. Check:
• Electric bilge pump strainer
Contaminants → Clean the cap and
strainer.
3. Install:
• Electric bilge pump strainer
• Electric bilge pump cap
• Band
• Negative battery cable

General

Drain plug check

1. Check:
• Drain plugs
• O-rings
Cracks/damage → Replace the O-ring.
Throttle valve and engine internal compo-
nents
1. Lubricate:
• Throttle valve
• Engine internal components
Lubricating steps:
1. Remove the engine cover.
2. Disconnect the breather hose 1 from the
breather assembly 2 side.
3. Start the engine, and then spray a rust
inhibitor through the breather hose 1 for
about 5 seconds while the engine is run-
ning.
3-23
E