Engine Mount Check; Engine Unit Installation - Yamaha WaveRunner VX 700 Service Manual

19. Suspend the engine unit using an engine
hangers, and then separate the unit from
the engine mounts and move it forward
to disconnect the coupling. NOTICE:
When removing the engine unit, take
care to avoid causing damage to the
hull liner and deck opening.

Engine mount check

1. Check the engine mounts. Replace if
cracked or damaged.
TIP:
• Make a note of the position of each engine
mount so that it can be installed in its origi-
nal position.
• When replacing the engine mounts, make
sure to check the coupling clearance.

Engine unit installation

When installing the engine unit, take care
to avoid causing damage to the hull liner
and deck opening.
1. Move the engine unit rearward to con-
nect the coupling 1, and then lower the
unit onto the engine mounts.
TIP:
Do not install the rubber damper until the
coupling clearance adjustment has been
made.
2. Temporarily install the engine mounting
bolts 2 and washer 3.
3. Lift the engine unit slightly, install the
shims 4, and then lower the unit.
2
3
TIP:
Install the shims in their original positions.
4. Measure the coupling clearance a, and
if necessary, add or remove shims 4 so
that the clearance b is within specifica-
tion.
a
Engine mount
1
1
2
3
4
2
5
3
4
6
7
8
9
b
A
5-6