Engine Oil Change - Yamaha WaveRunner FX SHO Service Manual

CHK
ADJ
Power unit
2. Remove the oil level gauge 1, wipe the
3. Remove the oil level gauge 1 again to
1
b
a
4. Install the oil level gauge.

Engine oil change

Be careful when handling the engine oil to
avoid burns. The engine oil is hot immedi-
ately after the engine is turned off.
CAUTION:
When checking the oil level on land, be
sure to connect a garden hose to the water-
craft for proper water supply.
1. Change:
Changing steps:
1. Place the watercraft in a precisely level
2. Start the engine, allow it to warm up for 5
3-14
gauge clean, and then install the gauge
into the oil level pipe completely.
check that the oil level is between the min-
imum level mark a and maximum level
mark b on the gauge.
WARNING
• Engine oil
position on land with the engine stopped.
minutes, and then stop the engine.
E
1
2
3
4
5
6
7
8
9