Monitoring Private Vlans - Cisco 3032 Software Configuration Manual

Chapter 16 Configuring Private VLANs

Monitoring Private VLANs

Table 16-1
Table 16-1
Command
show interfaces status
show vlan private-vlan
[type]
show interface switchport
show interface
private-vlan mapping
This is an example of the output from the show vlan private-vlan command:
Switch(config)# show vlan private-vlan
Primary Secondary Type
------- --------- ----------------- ------------------------------------------
10
10
10
OL-12247-04
shows the privileged EXEC commands for monitoring private-VLAN activity.
Private VLAN Monitoring Commands
Purpose
Displays the status of interfaces, including the VLANs to which they
belongs.
Display the private-VLAN information for the switch.
Display private-VLAN configuration on interfaces.
Display information about the private-VLAN mapping for VLAN SVIs.
501 isolated
502 community
503 non-operational
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
Ports
Gi2/0/1, Gi3/0/1, Gi3/0/2
Gi2/0/11, Gi3/0/1, Gi3/0/4
Monitoring Private VLANs
16-15