Management Options - Cisco 3032 Software Configuration Manual

Chapter 1 Overview
•
•
•
•
•
•
•
•
•

Management Options

These are the options for configuring and managing the switch:
•
•
•
•
OL-12247-04
Multicast Listener Discovery (MLD) snooping to enable efficient distribution of IP Version 6 (IPv6)
multicast data to clients and routers in a switched network.
Multicast VLAN registration (MVR) to continuously send multicast streams in a multicast VLAN
while isolating the streams from subscriber VLANs for bandwidth and security reasons
IGMP filtering for controlling the set of multicast groups to which hosts on a switch port can belong
IGMP throttling for configuring the action when the maximum number of entries is in the IGMP
forwarding table
IGMP leave timer for configuring the leave latency for the network
Switch Database Management (SDM) templates for allocating system resources to maximize
support for user-selected features
Web Cache Communication Protocol (WCCP) for redirecting traffic to wide-area application
engines, for enabling content requests to be fulfilled locally, and for localizing web-traffic patterns
in the network (requires the IP services feature set )Configurable small-frame arrival threshold to
prevent storm control when small frames (64 bytes or less) arrive on an interface at a specified rate
(the threshold)
RADIUS server load balancing to allow access and authentication requests to be distributed evenly
across a server group
Cisco Medianet to enable intelligent services in the network infrastructure for a wide variety of
video applications. One of the services of Medianet is auto provisioning for Cisco Digital Media
Players and Cisco IP Video Surveillance cameras through Auto Smartports.
An embedded device manager—The device manager is a GUI that is integrated in the universal
software image. You use it to configure and to monitor a single switch. For information about starting
the device manager, see the getting started guide. For more information about the device manager, see
the switch online help.
Network Assistant—Network Assistant is a network management application that can be
downloaded from Cisco.com. You use it to manage a single switch, a cluster of switches, or a
community of devices. For more information about Network Assistant, see Getting Started with
Cisco Network Assistant, available on Cisco.com.
CLI—The Cisco IOS software supports desktop- and multilayer-switching features. You can access
the CLI by connecting your management station directly to the switch console port, by connecting
your PC directly to the Ethernet management port, or by using Telnet from a remote management
station or PC. You can manage the switch stack by connecting to the console port or Ethernet
management port of any stack member. For more information about the CLI, see
the Command-Line Interface."
SNMP—SNMP management applications such as CiscoWorks2000 LAN Management Suite (LMS)
and HP OpenView. You can manage from an SNMP-compatible management station or a PC that is
running platforms such as HP OpenView or SunNet Manager. The switch supports a comprehensive
set of MIB extensions and four remote monitoring (RMON) groups. For more information about
using SNMP, see Chapter 33, "Configuring SNMP."
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
Features
Chapter 2, "Using
1-5