Configuring The Inaccessible Authentication Bypass Feature - Cisco 3032 Software Configuration Manual

Configuring 802.1x Authentication

Configuring the Inaccessible Authentication Bypass Feature

You can configure the inaccessible bypass feature, also referred to as critical authentication or the AAA
fail policy.
Beginning in privileged EXEC mode, follow these steps to configure the port as a critical port and enable
the inaccessible authentication bypass feature. This procedure is optional.
Command
Step 1 configure terminal
Step 2 radius-server dead-criteria time time
tries tries
Step 3 radius-server deadtime minutes
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
9-52
Chapter 9
Purpose
Enter global configuration mode.
(Optional) Set the conditions that are used to decide when a RADIUS
server is considered unavailable or dead.
The range for time is from 1 to 120 seconds. The switch dynamically
determines the default seconds value that is 10 to 60 seconds.
The range for tries is from 1 to 100. The switch dynamically determines
the default tries parameter that is 10 to 100.
(Optional) Set the number of minutes that a RADIUS server is not sent
requests. The range is from 0 to 1440 minutes (24 hours). The default is
0 minutes.
Configuring IEEE 802.1x Port-Based Authentication
OL-12247-04