Monitoring Private Vlans - Cisco WS-C3020 Software Configuration Manual

Monitoring Private VLANs

Monitoring Private VLANs
Table 14-1
Table 14-1 Private VLAN Monitoring Commands
Command
show interfaces status
show vlan private-vlan [type]
show interface switchport
show interface private-vlan mapping
This is an example of the output from the show vlan private-vlan command:
Switch(config)# show vlan private-vlan
Primary Secondary Type
------- --------- ----------------- ------------------------------------------
10
10
10
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
14-14
shows the privileged EXEC commands for monitoring private-VLAN activity.
Purpose
Displays the status of interfaces, including the VLANs to which they belongs.
Display the private-VLAN information for the switch.
Display private-VLAN configuration on interfaces.
Display information about the private-VLAN mapping for VLAN SVIs.
501 isolated
502 community
503 non-operational
Ports
Gi0/1, Gi0/2, Gi0/3
Gi0/1, Gi0/2, Gi0/4
Chapter 14 Configuring Private VLANs
OL-8915-03