Ip Address Configuration; Ip Address Configuration Restrictions; Ip Subnets - Telrad BreezeCOMPACT 1000 System Manual

Chapter 3 - Operation and AdministrationIP Address Configuration
Chapter 3: Operation and Administration
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3

IP Address Configuration

3.3.1

IP Address Configuration Restrictions

The following IP addresses should not be used and will be rejected:

0.0.0.0

224.0.0.0 – 255.255.255.255 (Multicasts, RFC 3171 D, RFC 1700 E)
3.3.2

IP Subnets

In a binary representation (32 bits), a Subnet Mask string must comprise a series of contiguous binary 1s starting from the
MSB, followed by a series of contiguous binary 0s.
Subnet Masks 0.0.0.0 (all zeros, meaning nothing) and 255.255.255.255 (all ones, meaning this address only) are illegal and
will be rejected.
BreezeCOMPACT System Manual BreezeCOMPACT System Manual
IP Address Configuration
49