Telrad BreezeCOMPACT 1000 System Manual page 82

Chapter 3 - Operation and AdministrationBS Menu
Chapter 3: Operation and Administration
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A change in the 802.1p Priority takes effect after the next reset.
3.7.2.6.3.2 Internal Management Traffic QOS Rules
The Internal Management Traffic QOS Rules menu enables you to view/update the values configured for the following
parameters:

Diffserv Code Point

802.1p Priority
3.7.2.6.3.2.1 Diffserv Code Point
DSCP priority value to be used for marking of internal management traffic. The range is 0–63. The default is 0.
A change in the Diffserve Code Point takes effect after the next reset.
3.7.2.6.3.2.2 802.1p Priority
802.1p priority value to be used for marking of internal management traffic. The range is 0–7. The default is 0.
A change in the 802.1p Priority takes effect after the next reset.
3.7.2.6.3.3 QOS Rules
The QOS Rules menu includes the following options:

Show: Use the Show option to view the main parameters (Rule Status, Marking Rule Name, Service Flow Data
Delivery Type and Service Flow Traffic Priority) of each existing QoS rule.

Add: Use the Add option to add a new QoS rule. The change takes effect after the next reset.

Select: Use the Select option to select a specific QoS rule by its Rule Number. You can then select one of the following:

Use the Show option to view all parameters of the selected rule.

Use the Update option to update one or several parameters of the selected rule. A rule is selected by the Rule
Number. Changes in a QoS rule take effect after the next reset.

Use the Delete option to remove the selected rule from the database. The change takes effect after the next reset.
QOS Rule parameters are described below.
3.7.2.6.3.3.1 Rule Number
The index number of the rule, which is a number in the range 1–16,383. The Rule Number of an existing rule cannot be
modified.
3.7.2.6.3.3.2 Rule Status
The status of the rule (Enabled or Disabled).
3.7.2.6.3.3.3 Marking Rule Name
The name of the QoS Marking Rule. This value is an optional string of up to 32 characters.
A change in Marking Rule Name takes effect after the next reset.
BreezeCOMPACT System Manual BreezeCOMPACT System Manual
BS Menu
83