Configuring Antenna Associations; Applying The Configuration - Telrad BreezeCOMPACT 1000 System Manual

Chapter 2 - CommissioningActivating the Unit
Chapter 2: Commissioning
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.5.3

Configuring Antenna Associations

Using the Monitor Program
1
Select Sector > Antenna Association > Add. You are prompted to configure the following parameters:

RF Port Number: Enter 1.

Antenna Number: Enter the relevant Antenna Number as configured in the Antenna menu.

Antenna Port Number: Enter the relevant Antenna Port Number.
2
Repeat the Antenna Association configuration for RF Port Numbers 2 to 4.
Using the Management System
1
In the Association section of the Sector 1 screen, click Add Association and enter the relevant Antenna Number and
Antenna Port Number for RF Port 1.
2
Repeat the process for RF Port Numbers 2 to 4.
3
Click Apply.
2.5.4

Applying the Configuration

To apply the changes, reset the unit as follows:

In the Monitor program, select BTS > Unit Control > ShutDown Operation > Update and then select the Reset
option for the Shutdown Operation parameter.

In the management system, select the Equipment > Chassis screen. In the Shut Down Operation section, select the
Reset option for the Shut Down Type parameter and click Apply.
BreezeCOMPACT System Manual BreezeCOMPACT System Manual
Activating the Unit
42