Show Current State; Start Scanning; Abort Scanning - Telrad BreezeCOMPACT 1000 System Manual

Chapter 3 - Operation and AdministrationSpectrum Analyzer
Chapter 3: Operation and Administration
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 – Set Default Configuration
3.11.3

Show Current State

This parameter displays the Spectrum Analyzer state per BS/Sector. It indicates the enabled/disabled state and scanning
state.
3.11.4

Start Scanning

This parameter starts the scanning process.
3.11.5

Abort Scanning

This parameter aborts the scanning state. Results are shown up to the last scanned frequency.
BreezeCOMPACT System Manual BreezeCOMPACT System Manual
Spectrum Analyzer
97