Chassis Menu; General - Telrad BreezeCOMPACT 1000 System Manual

Chapter 3 - Operation and AdministrationChassis Menu
Chapter 3: Operation and Administration
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.8

Chassis Menu

The Chassis menu includes the following options:


General


Ports Control
3.8.1 General
The Chassis General menu enables you to view the following read-only general chassis properties and status:

HW Version.

Serial Number.

Temperature (°C).

Operational SW Version.

Shadow SW Version.

Running SW Version: The source of the current running software version (operational/Shadow).

Boot SW Version.

Active Data Port MAC Address: The MAC address of the active data port.

Data Three MAC Address: The MAC address of Data Port 3.

Topology Type: The Topology Type used by the unit. In the current release, only One Sector, One Carrier topology (see
"BreezeCOMPACT Product Topologies" on page

Maximal Frame Size (see details below).

SFP Product Type: The installed SFP type (if any) in DAT1 port. The available options include approved SFP types,
none (SFP not installed) and not Verified (a non-approved SFP).

RCW Version.
3.8.1.1 Topology Type
You can update the topology type of the BTS on the Update menu (single area, single carrier; dual carrier, dual area; dual
carrier on area)
BreezeCOMPACT System Manual BreezeCOMPACT System Manual
18) is supported.
Chassis Menu
88