Ip Addresses Configuration; Ip Address Configuration Restrictions; Ip Subnets - Telrad BreezeCOMPACT System Manual

Chapter 3 - Operation and AdministrationIP Addresses Configuration
Chapter 3 - Operation and Administration
3.3

IP Addresses Configuration

3.3.1

IP Address Configuration Restrictions

1
The following IP addresses should not be used and will be rejected:
0.0.0.0
224.0.0.0 - 255.255.255.255 (Multicasts, RFC 3171 D, RFC 1700 E)
3.3.2

IP Subnets

In a binary representation (32 bits) a Subnet Mask string must comprise a series of contiguous binary '1's
starting from the MSB, followed by a series of contiguous binary '0's.
Subnet Masks 0.0.0.0 (all zeros, meaning "nothing") and 255.255.255.255 (all ones, meaning "this
address only") are illegal and will be rejected.
BreezeCOMPACT System Manual
IP Addresses Configuration
41