D-Link DES-3250TG Command Line Interface Reference Manual page 66

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
config snmp system_contact
Purpose Used to enter the name of a contact person who
is responsible for the switch.
Syntax config snmp system_contact <sw_contact>
Description This command is used to enter the name and|or
other information to identify a contact person
who is responsible for the switch. A maximum of
255 characters can be used.
<sw_contact> − A maximum of 255 characters
Parameters
used to identify a contact person who is
responsible for the switch.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To configure the switch contact to "ctsnow":
.
local>config snmp system_contact ctsnow
Command: config snmp system_contact ctsnow
Success.
local>
66