D-Link DES-3250TG Command Line Interface Reference Manual page 58

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
show port_security
Purpose Used to display the current port security
configuration.
Syntax show port_security {ports <portlist>}
Description This command is used to display port security
information of the switch ports. The information
displayed includes port security admin state,
maximum number of learning address and lock
mode.
<portlist> − Specifies a range of ports to be
Parameters
configured. The port list is specified by listing
the beginning port number and the highest port
number of the range. The beginning and end of
the port list range are separated by a dash. For
example, 3 would specify port 3. 4 specifies port
4. 3-4 specifies all of the ports between port 3
and port 4 − in numerical order.
Restrictions none.
Example usage:
To display the port security configuration:
local>show port_security
Command: show port_security
Port# Admin State Max. Learning Addr. Lock Address Mode
---- ----------- ------------------- -----------------
1 Disabled 1
2 Disabled 1
3 Disabled 1
DeleteOnReset
DeleteOnReset
DeleteOnReset
58