D-Link DES-3250TG Command Line Interface Reference Manual page 279

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
create access_profile
igmp − Specifies that the switch will examine
each frame's Internet Group Management
Protocol (IGMP) field.
type − Specifies that the switch will examine
each frame's IGMP Type field.
tcp − Specifies that the switch will examine each
frames Transport Control Protocol (TCP) field.
src_port_mask <hex 0x0-0xffff> − Specifies a
TCP port mask for the source port.
dst_port_mask <hex 0x0-0xffff> − Specifies a
TCP port mask for the destination port.
udp − Specifies that the switch will examine
each frame's Universal Datagram Protocol
(UDP) field.
src_port_mask <hex 0x0-0xffff> − Specifies a
UDP port mask for the source port.
dst_port_mask <hex 0x0-0xffff> − Specifies a
UDP port mask for the destination port.
protocol_id − Specifies that the switch will
examine each frame's Protocol ID field.
user_mask <hex 0x0-0xffffffff> − Specifies that
the rule applies to the IP protocol ID and the
mask options behind the IP header.
permit − Specifies that packets that match the
access profile are permitted to be forwarded by
the switch.
deny − Specifies that packets that do not match
the access profile are not permitted to be
forwarded by the switch and will be filtered.
profile_id <value 1-255> − Specifies an index
number that will identify the access profile being
created with this command.
279