D-Link DES-3250TG Command Line Interface Reference Manual page 133

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
show syslog host
Purpose Used to display the syslog hosts currently
configured on the switch.
Syntax show syslog host {<index 1-4>}
Description The show syslog host command is used to
display the syslog hosts that are currently
configured on the switch.
<index 1-4> − Specifies that the command will
Parameters
be applied to an index of hosts. There are four
available indexes, numbered 1 through 4.
Restrictions None.
Example usage:
To show Syslog host information:
local>show syslog host
Command: show syslog host
Syslog Global State: Disabled
Host Id Host IP Address Severiry Facility UDP port Status
------- ---------------
1 10.1.1.2
2 10.40.2.3
3 10.21.13.1
Total Entries : 3
local>
-------------- -------- --------
All Local0 514
All Local0 514
All Local0 514
133
--------
Disabled
Disabled
Disabled