D-Link DES-3250TG Command Line Interface Reference Manual page 283

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
config access_profile
add access_id <value 1-255> − Adds an
additional rule to the above specified access
profile. The value specifies the relative priority
of the additional rule. A lower access ID, the
higher the priority the rule will be given.
ethernet − Specifies that the switch will look only
into the layer 2 part of each packet.
vlan <vlan_name 32> − Specifies that the
access profile will apply to only to this VLAN.
source_mac <macaddr> − Specifies that the
access profile will apply to only packets with this
source MAC address.
destination_mac <macaddr> − Specifies that the
access profile will apply to only packets with this
destination MAC address.
802.1p <value 0-7> − Specifies that the access
profile will apply only to packets with this 802.1p
priority value.
ethernet_type <hex 0x0-0xffff> − Specifies that
the access profile will apply only to packets with
this hexidecimal 802.1Q Ethernet type value in
the packet header.
ip − Specifies that the switch will look into the IP
fields in each packet.
vlan <vlan_name 32> − Specifies that the
access profile will apply to only to this VLAN.
source_ip <ipaddr> − Specifies that the access
profile will apply to only packets with this source
IP address.
destination_id <value 0-255> − Specifies that
the access profile will apply to only packets with
this destination IP address.
283