DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
T
RAFFIC
The traffic control commands in the Command Line Interface (CLI) are
listed (along with the appropriate parameters) in the following table.
Command
Parameters
config traffic control
<storm_grouplist 1-8>
all
broadcast [enabled|disabled]
multicast [enabled|disabled]
dlf [enabled|disabled]
threshold <value 0-255>
show traffic control
group_list <storm_grouplist 1-8>
Each command is listed, in detail, in the following sections.
13
C
ONTROL
C
OMMANDS
161