D-Link DES-3250TG Command Line Interface Reference Manual page 221

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
show link_aggregation
Purpose Used to display the current link aggregation
configuration on the switch.
Syntax
show link_aggregation {group_id <group_id
1-6>|algorithm}
Description This command will display the current link
aggregation configuration of the switch.
<group_id 1-6> − Specifies the group id. The
Parameters
switch allows up to 6 link aggregation groups to
be configured. The group number identifies
each of the groups.
algorithm − Allows you to specify the display of
link aggregation by the algorithm in use by that
group.
Restrictions None.
Example usage:
To display Link Aggregation configuration
local>show link_aggregation
Command: show link_aggregation
Link Aggregation Algorithm = MAC-source
Group ID : 1
Type : LACP
Master Port : 4
Member Port : 3-4
Active Port :
Status : Enabled
Flooding Port : 4
221