D-Link DES-3250TG Command Line Interface Reference Manual page 202

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
enable gvrp
Purpose Used to enable GVRP on the switch.
Syntax enable gvrp
Description This command, along with disable gvrp below,
is used to enable and disable GVRP on the
switch − without changing the GVRP
configuration on the switch.
Parameters none.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To enable the generic VLAN Registration Protocol (GVRP):
local>enable gvrp
Command: enable gvrp
Success.
local>
202