D-Link DES-3250TG Command Line Interface Reference Manual page 219

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
config link_aggregation algorithm
Purpose Used to configure the link aggregation algorithm.
Syntax
config link_aggregation algorithm
[mac_source|mac_destination|mac_source_dest|
ip_source|ip_destination|ip_source_dest]
Description This command configures to part of the packet
examined by the switch when selecting the egress
port for transmitting load-sharing data. This feature is
only available using the address-based load-sharing
algorithm.
mac_source − Indicates that the switch should
Parameters
examine the MAC source address.
mac_destination − Indicates that the switch should
examin the MAC destination address.
mac_source_dest − Indicates that the switch should
examine the MAC source and ddestination
addresses
ip_source − Indicates that the switch should examine
the IP source address.
ip_destination − Indicates that the switch should
examine the IP destination address.
ip_source_dest − Indicates that the switch should
examine the IP source address and the destination
address.
Restrictions Only administrator-level users can issue this
command.
219