D-Link DES-3250TG Command Line Interface Reference Manual page 128

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
config syslog host
5
6
7
informational − Specifies that informational
messages will be sent to the remote host. This
corresponds to number 6 from the list above.
warning − Specifies that warning messages will
be sent to the remote host. This corresponds to
number 4 from the list above.
all − Specifies that all of the currently supported
syslog messages that are generated by the
switch will be sent to the remote host.
facility − Some of the operating system
daemons and processes have been assigned
Facility values. Processes and daemons that
have not been explicitly assigned a Facility may
use any of the"local use" facilities or they may
use the "user-level" Facility. Those Facilities that
have been designated are shown in the
following: Bold font means the facility values the
switch supports now.
Numerical
Code
0
1
2
3
4
5
syslog
Notice: normal but significant condition
Informational: informational messages
Debug: debug-level messages
Facility
kernel messages
user-level messages
mail system
system daemons
security|authorization messages
messages generated internally by
128