D-Link DES-3250TG Command Line Interface Reference Manual page 101

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
show snmp host
Purpose Used to display the recipient of SNMP traps
generated by the switch's SNMP agent.
Syntax show snmp host {<ipaddr>}
Description The show snmp host command is used to
display the IP addresses and configuration
information of remote SNMP managers that are
designated as recipients of SNMP traps that are
generated by the switch's SNMP agent.
<ipaddr> − The IP address of a remote SNMP
Parameters
manager that will receive SNMP traps
generated by the switch's SNMP agent.
Restrictions None.
Example Usage:
To display the currently configured SNMP hosts on the switch:
local>show snmp host
Command: show snmp host
SNMP Host Table
Host IP Address SNMP Version
--------------- ---------------------
10.48.76.23 V2c private
10.48.74.100 V3 authpriv
Total Entries: 2
Community Name/SNMPv3 UserName
------------------------------
public
101